Topic started by: adtmatt
Subject: RE: SEVERE lack of power...
I really neeedd to find this info, thank God!
on 01-18-2012 11:02:39 pm

Topic started by: enginet26
Subject: RE: Where'd that offset come from?
No.  I don't think there was anything wrong with the circuit, although I have run into signals like FPDM (fuel pump d...
enginet26 on 06-15-2011 9:07:28 pm

Topic started by: enginet26
Subject: Distributor Cam Signals
type message here
enginet26 on 04-19-2011 7:00:44 pm

Topic started by: adtmatt
Subject: RE: CMP CKP #1sync
My apologies, Bryan.  I did not tag the CKP during the diag.  Sorry about that. 
adtmatt on 01-10-2011 10:07:20 am

Topic started by: HTORRES
Subject: RE: What were your results?
I'M HAVING TROUBLE UP LOADING THE SAVED FILES, BUT I WILL HAVE THE RESULTS POSTED SOON.
HTORRES on 07-20-2010 11:23:09 am

Topic started by: marko111
Subject: RE: RE: Another approach
Hi Mark, I like to use the FLS or WPS in the intake, if I have an interest I will put the FLS in the tailpipe but us...
PaulSuitor on 04-20-2010 9:12:49 am

Topic started by: PaulSuitor
Subject: RE: RE: less pressure drop
Ok Paul. I thought about it again ,a restricted injector only.Were the fuel trims on the positive side? How did the...
marko111 on 04-16-2010 5:51:49 pm

Topic started by: marko111
Subject: RE: RE: RE: Current probes that came in the kit?
That would be great. Thanks alot.
marko111 on 04-13-2010 4:22:48 pm

Topic started by: PiiistolPete
Subject: RE: RE: What Situations Are You Guys Useing Tail Pipe Transducers For
Fixed. Thanks for the upload. Later, Matt.
adtmatt on 10-13-2009 3:26:55 pm

Topic started by: PiiistolPete
Subject: Another Know Good
This was a fun one to figure out  the key was to know what modules are on what bus.
PiiistolPete on 06-22-2009 11:38:02 pm

Topic started by: PiiistolPete
Subject: What Methods Are You Guys Useing To Build Your Database
This Truck was in for an oil change
PiiistolPete on 06-22-2009 11:24:55 pm

Topic started by: ModisRocks
Subject: RE: the valve timing is retarded
Cam timing in your post is actually advanced. There is a lot of good info and reference waveform at ATS  http://www...
PiiistolPete on 07-08-2008 8:21:32 pm

Topic started by: adtmatt
Subject: RE: RE: RE: RE: Does anything bother you about how the scope is set up in this instance?
Thanks Matt.  Sorry for the no response.  I will read that and thanks for the descriptive explanation. 
Jeffrey on 04-26-2008 2:51:13 pm

Topic started by: cragtech
Subject: RE: lower hump
Although not absolute, it warrants further investigation.  The lower peak would indicate that the starter is not work...
adtmatt on 11-12-2007 10:07:40 am

Topic started by: adtmatt
Subject: RE: RE: RE: RE: RE: rayan's post
Absolutely. 
RKooiman on 10-02-2007 3:05:05 pm

Topic started by: adtmatt
Subject: RE: RE: 9.18
VAT 40...is that like a beer keg?
DougSMPTrainer on 10-01-2007 6:13:43 pm

Topic started by: adtmatt
Subject: RE: RE: 12 bit...16 bit?
Well, chop chop. Hurry up. Inquiring minds want to know.  I tried explaining the benefits of 12 bit to a guy the othe...
RKooiman on 08-30-2007 8:16:10 pm

Topic started by: adtmatt
Subject: RE: Pulse Width Trigger?
Advanced triggers has been enabled on the next release which should be available for download next week.  Good eye, D...
adtmatt on 08-24-2007 2:41:11 pm